BOL: Related items

LUMPY

Shruti Paniwala — Thu, 25 Aug 2016 08:05:02 -0500

A probabilistic framework for structural variant discovery.

Ryan M Layer, Colby Chiang, Aaron R Quinlan, and Ira M Hall. 2014. "LUMPY: a Probabilistic Framework for Structural Variant Discovery." Genome Biology 15 (6): R84. doi:10.1186/gb-2014-15-6-r84.

More at https://github.com/arq5x/lumpy-sv

Address of the bookmark: https://github.com/arq5x/lumpy-sv

Ka, Ks and Ka/Ks calculations

Poonam Mahapatra — Mon, 29 Aug 2016 11:44:11 -0500

gKaKs is a codon-based genome-level Ka/Ks computation pipeline developed and based on programs from four widely used packages: BLAT, BLASTALL (including bl2seq, formatdb and fastacmd), PAML (including codeml and yn00) and KaKs_Calculator (including 10 substitution rate estimation methods). gKaKs can automatically detect and eliminate frameshift mutations and premature stop codons to compute the substitution rates (Ka, Ks and Ka/Ks) between a well-annotated genome and a non-annotated genome or even a poorly assembled scaffold dataset. It is especially useful for newly sequenced genomes that have not been well annotated.

Look for KaKs calculation:

https://github.com/fumba/kaks-calculator

http://longlab.uchicago.edu/?q=gKaKs

http://www.ncbi.nlm.nih.gov/pubmed/23314322

Address of the bookmark: http://longlab.uchicago.edu/?q=gKaKs

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

Assembly tutorial PPT

Jit — Wed, 07 Sep 2016 03:12:53 -0500

Saved Cornell University assembly workshop PPT.

Reference:

http://cbsu.tc.cornell.edu/lab/doc/assembly_workshop_20150420_lecture1.pdf

OPERA : Optimal Paired-End Read Assembler

Jit — Fri, 09 Sep 2016 05:28:58 -0500

OPERA (Optimal Paired-End Read Assembler) is a sequence assembly program (http://en.wikipedia.org/wiki/Sequence_assembly). It uses information from paired-end/mate-pair/long reads to order and orient the intermediate contigs/scaffolds assembled in a genome assembly project, in a process known as Scaffolding. OPERA is based on an exact algorithm that is guaranteed to minimize the discordance of scaffolds with the information provided by the paired-end/mate-pair/long reads (for further details see Gao et al, 2011).

Note that since the original publication, we have made significant changes to OPERA (v1.0 onwards) including refinements to its basic algorithm (to reduce local errors, improve efficiency etc.) and incorporated features that are important for scaffolding large genomes (multi-library support, better repeat-handling etc.), in addition to other scalability and usability improvements (bam and gzip support, smaller memory footprint). We therefore encourage you to download and use our latest version: OPERA-LG. In our benchmarks, it has significantly improved corrected N50 and reduced the number of scaffolding errors. Furthermore, our latest release contains the wrapper script OPERA-long-read that enables scaffolding with long-reads from third-generation sequencing technologies (PacBio or Oxford Nanopore). The manuscript describing the new features and algorithms is available at Genome Biology. We look forward to getting your feedback to improve it further.

Address of the bookmark: https://sourceforge.net/p/operasf/wiki/The%20OPERA%20wiki/

Ribbon !!

Jit — Fri, 21 Oct 2016 04:54:30 -0500

Visualization has played an extremely important role in the current genomic revolution to inspect and understand variants, expression patterns, evolutionary changes, and a number of other relationships. However, most of the information in read-to-reference or genome-genome alignments is lost for structural variations in the one-dimensional views of most genome browsers showing only reference coordinates. Instead, structural variations captured by long reads or assembled contigs often need more context to understand, including alignments and other genomic information from multiple chromosomes. We have addressed this problem by creating Ribbon (genomeribbon.com) an interactive online visualization tool that displays alignments along both reference and query sequences, along with any associated variant calls in the sample. This way Ribbon shows patterns in alignments of many reads across multiple chromosomes, while allowing detailed inspection of individual reads (Supplementary Note 1). For example, here we show a gene fusion in the SK-BR-3 breast cancer cell line linking the genes CYTH1 and EIF3H. While it has been found in the transcriptome previously, genome sequencing did not identify a direct chromosomal fusion between these two genes. After SMRT sequencing, Ribbon shows that there are indeed long reads that span from one gene to the other, going through not one but two variants, for the first time showing the genomic link between these two genes (Figure 1a). More gene fusions of this cancer cell line are investigated in Supplementary Note 2. Figure 1b shows another complex event in this sample made simple in Ribbon: the translocation of a 4.4 kb sequence deleted from chr19 and inserted into chr16 (Figure 1b). Thus, Ribbon enables understanding of complex variants, and it may also help in the detection of sequencing and sample preparation issues, testing of aligners and variant-callers, and rapid curation of structural variant candidates (Supplementary Note 3). In addition to SAM and BAM files with long, short, or paired-end reads, Ribbon can also load coordinate files from whole genome aligners such as MUMmer. Therefore, Ribbon can be used to test assembly algorithms or inspect the similarity between species. Supplementary Note 4 shows a comparison of gorilla and human genomes using Ribbon, highlighting major structural differences. In conclusion, Ribbon is a powerful interactive web tool for viewing complex genomic alignments.

Script at https://github.com/MariaNattestad/ribbon

Address of the bookmark: http://genomeribbon.com/

eFORGE.v1.2

Jit — Fri, 28 Oct 2016 09:06:59 -0500

The eFORGE tool provides a method to view the tissue specific regulatory component of a set of EWAS DMPs. eFORGE analysis takes a set of DMPs, such as those hits above genome-wide significance threshold in an EWAS study, and analyses whether there is enrichment for overlap of putative functional elements compared to matched background DMPs. It assesses enrichment on a per cell type basis, since functional elements are differentially active in different cell types, and hence can expose tissue-specific signals of enrichment for the given test DMP set. This can reveal the sites of action underlying the EWAS signal, and provide confirmation of the validity of the EWAS where a tissue-specific mechanism is known or expected for the phenotype. Conversely unknown tissue involvements can also be revealed.

Address of the bookmark: http://eforge.cs.ucl.ac.uk/eFORGE.v1.2/?documentation

R Graphical Cookbook by Winston Chang

Abhimanyu Singh — Fri, 04 Nov 2016 12:50:30 -0500

R Graphical Cookbook by Winston Chang

A very nice book by Winston Chang for R ethusiast. The R code presented in these pages is the R code actually used to produce the Figures in the book. There will be differences compared to the code chunks shown in the text of the book, but in most cases the differences will be that these pages contain additional code to lay out multiple plots on a single "page".

The code presented for each figure is self-contained, i.e., all code required to produce the figure is included. This means that there is sometimes considerable overlap of code between several figures In some cases, it may be necessary to install an add-on package from CRAN to get the code to run.

More books at http://www.e-reading.club/bookreader.php/137370/C486x_APPb.pdf

Bookmarks Biostatistics materials and books

Jit — Tue, 08 Nov 2016 07:42:42 -0600

Biostatistics did not spring fully formed from the brow of R. A. Fisher, but evolved over many years. This process is continuing, although it may not be obvious from the outside. It has been ten years since the first edition of this book appeared (and rather longer since it was begun). Over this time, new areas of biostatistics have been developed and emphases and interpretations have changed

Please bookmarks your favourate biostatistics books in commend sectons ...

Address of the bookmark: http://www.cos.ufrj.br/~bioestatistica/livros/Introduction%20to%20Biostatistics.pdf

GoJS

Jit — Tue, 22 Nov 2016 08:25:37 -0600

GoJS is a feature-rich JavaScript library for implementing custom interactive diagrams and complex visualizations across modern web browsers and platforms. GoJS makes constructing JavaScript diagrams of complex nodes, links, and groups easy with customizable templates and layouts.

GoJS offers many advanced features for user interactivity such as drag-and-drop, copy-and-paste, in-place text editing, tooltips, context menus, automatic layouts, templates, data binding and models, transactional state and undo management, palettes, overviews, event handlers, commands, and an extensible tool system for custom operations.

GoJS is pure JavaScript, so users get interactivity without requiring round-trips to servers and without plugins. GoJS normally runs completely in the browser, rendering to an HTML5 Canvas element or SVG without any server-side requirements. GoJS does not depend on any JavaScript libraries or frameworks, so it should work with any HTML or JavaScript framework or with no framework at all.

More at http://gojs.net/latest/index.html

Address of the bookmark: http://gojs.net/latest/index.html