BOL: Related items

MashMap: a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s)

Jit — Tue, 12 Dec 2017 17:23:31 -0600

MashMap is a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s). It maps a query sequence against a reference region if and only if its estimated alignment identity is above a specified threshold. It does not compute the alignments explicitly, but rather estimates a k-mer based Jaccard similarity using a combination of Winnowing and MinHash. This is then converted to an estimate of sequence identity using the Mash distance. An appropriate k-mer sampling rate is automatically determined given minimum local alignment length and identity thresholds. The efficiency of the algorithm improves as both of these thresholds are increased.

Address of the bookmark: https://github.com/marbl/MashMap

HISAT2: a fast and sensitive alignment program for mapping next-generation sequencing reads

Rahul Nayak — Tue, 08 May 2018 04:27:22 -0500

HISAT2 is a fast and sensitive alignment program for mapping next-generation sequencing reads (both DNA and RNA) to a population of human genomes (as well as to a single reference genome). Based on an extension of BWT for graphs [Sirén et al. 2014], we designed and implemented a graph FM index (GFM), an original approach and its first implementation to the best of our knowledge. In addition to using one global GFM index that represents a population of human genomes, HISAT2 uses a large set of small GFM indexes that collectively cover the whole genome (each index representing a genomic region of 56 Kbp, with 55,000 indexes needed to cover the human population). These small indexes (called local indexes), combined with several alignment strategies, enable rapid and accurate alignment of sequencing reads. This new indexing scheme is called a Hierarchical Graph FM index (HGFM).

more at https://ccb.jhu.edu/software/hisat2/index.shtml

Address of the bookmark: https://github.com/infphilo/hisat2

mosdepth: fast BAM/CRAM depth calculation for WGS, exome, or targeted sequencing

Jit — Wed, 13 Nov 2019 22:20:19 -0600

mosdepth can output:

per-base depth about 2x as fast samtools depth--about 25 minutes of CPU time for a 30X genome.
mean per-window depth given a window size--as would be used for CNV calling.
the mean per-region given a BED file of regions.
a distribution of proportion of bases covered at or above a given threshold for each chromosome and genome-wide.
quantized output that merges adjacent bases as long as they fall in the same coverage bins e.g. (10-20)
threshold output to indicate how many bases in each region are covered at the given thresholds.
A summary of mean depths per chromosome and within specified regions per chromosome.

Address of the bookmark: https://github.com/brentp/mosdepth

FastProNGS: fast preprocessing of next-generation sequencing reads

Rahul Nayak — Sat, 26 Dec 2020 08:35:21 -0600

FastProNGS to integrate the quality control process with automatic adapter removal. Parallel processing was implemented to speed up the process by allocating multiple threads. Compared with similar up-to-date preprocessing tools, FastProNGS is by far the fastest.

Address of the bookmark: https://github.com/Megagenomics/FastProNGS

chromeister: An ultra fast, heuristic approach to detect conserved signals in extremely large pairwise genome comparisons.

Jit — Thu, 03 Feb 2022 04:01:55 -0600

chromeister: An ultra fast, heuristic approach to detect conserved signals in extremely large pairwise genome comparisons.

USAGE:

-query: sequence A in fasta format
-db: sequence B in fasta format
-out: output matrix
-kmer Integer: k>1 (default 32) Use 32 for chromosomes and genomes and 16 for small bacteria
-diffuse Integer: z>0 (default 4) Use 4 for everything - if using large plant genomes you can try using 1
-dimension Size of the output matrix and plot. Integer: d>0 (default 1000) Use 1000 for everything that is not full genome size, where 2000 is recommended

Address of the bookmark: https://github.com/estebanpw/chromeister

dcGOR

Martin Jones — Sat, 08 Nov 2014 14:54:28 -0600

An R package for analysing ontologies and protein domain annotations has been published in PLoS Computational Biology (http://dx.doi.org/10.1371/journal.pcbi.1003929). The package is distributed as part of CRAN (http://cran.r-project.org/package=dcGOR), and also at GitHub for version control.

The dedicated website is available in http://supfam.org/dcGOR, from which several demos are also provided:

1. Analysing SCOP domains: http://supfam.org/dcGOR/demo-Fang.html

2. Analysing Pfam domains: http://supfam.org/dcGOR/demo-Basu.html

3. Analysing InterPro domains: http://supfam.org/dcGOR/demo-Customisation.html

CANU: Assembling Large Genomes with Single-Molecule Sequencing and Locality Sensitive Hashing.

Jit — Tue, 26 Apr 2016 11:38:10 -0500

Canu is a fork of the Celera Assembler designed for high-noise single-molecule sequencing (such as the PacBio RSII or Oxford Nanopore MinION). The software is currently alpha level, feel free to use and report issues encountered.

Canu is a hierachical assembly pipeline which runs in four steps:

Detect overlaps in high-noise sequences using MHAP
Generate corrected sequence consensus
Trim corrected sequences
Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

ORFfinder with smart BLAST

Jit — Tue, 17 May 2016 01:43:15 -0500

ORF Finder

ORFfinder is a graphical analysis tool for finding open reading frames (ORFs). We’ve been working on a few updates, and we’d like to find out what you think about them. Read on to find out what you can do with the new ORFfinder.

Smart BLAST (https://ncbiinsights.ncbi.nlm.nih.gov/2015/07/29/smartblast/)

Select one or a group of ORFs and BLAST several databases at once, and use the newly developed SmartBLAST to verify protein names. Looking for the traditional results from BLAST? They’re there too.

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

Mauve: a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion

Jit — Sat, 24 Dec 2016 09:20:53 -0600

Mauve is a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion. Multiple genome alignments provide a basis for research into comparative genomics and the study of genome-wide evolutionary dynamics.

Mauve has been developed with the idea that a multiple genome aligner should require only modest computational resources. It employs algorithmic techniques that scale well in the lengths of sequences being aligned. For example, a pair of Y. pestis genomes can be aligned in under a minute, while a group of 9 divergent Enterobacterial genomes can be aligned in a few hours. However, the current algorithm’s compute time (progressiveMauve) scales cubically in the number of genomes to align, making it unsuitable for datasets containing more than 50-100 bacterial genomes.

Address of the bookmark: http://darlinglab.org/mauve/mauve.html