BOL: Related items

Bioinformatics JRF/SRF position at NII

Sun, 25 May 2014 16:54:04 -0500

NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI-110067

Applications are invited for the position of Senior Research Fellow for the following time-bound sponsored project as per the details given below:

1. BTIS project on, “Bioinformatics Center-National Infrastructural Facility in the Area of Immunology” funded by DBT

Senior Research Fellow (P) (One Position only)

Dr. Debasisa Mohanty
Staff Scientist-VI
deb@nii.res.in

Qualifications: M.Sc in Biological Sciences or Biotechnology with at least 04 years of Research experience in Bioinformatics or computational Biology after the master’s degree is essential.

Emoluments: The selected candidates will draw consolidated emoluments as per Institute Rules, depending upon qualifications & experience

Rs. 18,000/- per month consolidated plus 30% HRA if Leading to Ph.D/NET/GATE Qualified otherwise Rs. 14,000/- per month + 30% HRA.

Job description: The candidate should be well versed in programming in PERL/C++/HTML/CGI, web server and portal development, computational analysis of
protein structure & function, molecular dynamics simulations and use of high performance computing systems.

GENERAL TERMS AND CONDITIONS:-

1. The candidates selected for the above posts will be on contract for one year or duration of the project whichever is shorter, at a time.
2. No hostel/ housing facility will be provided.
3. Number of posts may vary and shall be need based. Advertisement is no commitment.
4. Applicants may clearly mention the category they belong to i.e. SC/ST/OBC/PH and attach documentary proof of the same.
5. No TA/DA will be paid for attending the interview, if called for.
6. Apart from sending application in the prescribed format given below, candidates should send complete Curriculum Vitae along with the names of three referees. Curriculum Vitae should contain details of the experimental expertise.

HOW TO APPLY Interested candidates may apply directly, STRICTLY IN THE PRESCRIBED FORMAT GIVEN BELOW, through e-mail, to the Investigator of the project, clearly indicating the name of the project along with their complete C.V., e-mail id, fax numbers, telephone numbers. Only Short listed candidates will be called for interview and they required to submit attested copies of all their certificates and a Demand Draft of Rs 100/- drawn on Canara Bank or Indian Bank payable at Delhi/New Delhi in favour of the Director, NII (SC / ST and PH candidates are exempted subject to submission of documentary proof), at the time of interview.

LAST DATE OF RECEIPT OF APPLICATIONS: 06th June, 2014

www1.nii.res.in/sites/default/files/projectappointment-Dr.Mohanty-6June2014.pdf

Tools for bacterial whole genome annotation

Radha Agarkar — Sat, 16 Dec 2017 17:37:47 -0600

RAST – Web tool (upload contigs), uses the subsystems in the SEED database and provides detailed annotation and pathway analysis. Takes several hours per genome but I think this is the best way to get a high quality annotation (if you have only a few genomes to annotate).

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume. NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.

Bioinformatics JRF vacancy at ICGEB, New Delhi

Wed, 23 Jul 2014 16:07:15 -0500

Junior Research Fellow for a DBT sponsored project entitled "Computational and experimental characterization of stage specific arginine methylation in P. falciparum proteome".

Candidates should have a 1st class MSc/MTech/BTech degree in Bioinformatics. Please send complete CV, quoting Application for RMETH-JRF-2014, by email to Dr. Dinesh Gupta: dinesh@icgeb.res.in

Closing date for applications: 6 August 2014

More at http://www.icgeb.org/tl_files/Vacancies/JRF.pdf

Linux Sort Commands for Bioinformatics

Rahul Nayak — Sat, 31 May 2014 15:41:16 -0500

Almost all the scripting languages such as Perl, Python etc have built-in sort, but unfortunately none of them are as flexible as sort command. But one when it come to space efficiency GNU sort stands at the top. It can sort a 20Gb file with less than 2Gb memory. It is not trivial to implement so powerful a sort by yourself.

sort a space-delimited file based on its first column, then the second if the first is the same, and so on:
sort input.txt

sort a huge file (GNU sort ONLY):
sort -S 1500M -t $HOME/tmp input.txt > sorted.txt

sort starting from the third column, skipping the first two columns:
sort +2 input.txt

sort the second column as numbers, descending order; if identical, sort the 3rd as strings, ascending order:
sort -k2,2nr -k3,3 input.txt

sort starting from the 4th character at column 2, as numbers:
sort -k2.4n input.txt

More Linxu sort command information

If you have any sort commands you'd like to share, please add them to our comments section below. For more help, you can also type:

man sort

or

sort --help

on your Unix/Linux system.

List of visualization tools for genome alignments

Rahul Nayak — Fri, 02 Feb 2018 13:25:33 -0600

Genome browsers are useful not only for showing final results but also for improving analysis protocols, testing data quality, and generating result drafts. Its integration in analysis pipelines allows the optimization of parameters, which leads to better results. But sometime, we need publication ready figure of genomes. Following are the list of genome alignment visualization tools, which could be useful for analysis and interpretation of results:

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV)

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

Next generation sequencing in R or bioconductor environment

John Parker — Mon, 02 Jun 2014 18:03:09 -0500

There are many R software and bioconductor packages for NGS data analysis, some of them are as follows

Biostrings

The Biostrings package from Bioconductor provides an advanced environment for efficient sequence management and analysis in R. It contains many speed and memory effective string containers, string matching algorithms, and other utilities, for fast manipulation of large sets of biological sequences. The objects and functions provided by Biostrings form the basis for many other sequence analysis packages. Documentation

IRanges Overview

IRanges provides the low-level infrastructure and containers for handling sets of integer ranges within Bioconductor's BioC-Seq domain. Its classes and methods provide support for many more high-level packages like GenomicRanges, ShortRead, Rsamtools, etc. Documentation

GenomicRanges Overview

The GenomicRanges package serves as the foundation for representing genomic locations within the Bioconductor project. It is built upon the IRanges infrastructure and defines three major data containers - GRanges, GRangesList and GappedAlignments - which are supporting other important BioC-Seq packages including ShortRead, Rsamtools, rtracklayer, GenomicFeatures and BSgenome. Compared to the IRanges container, the GRanges/GRangesList classes are more flexible and extensible to store additional information about sequence ranges, such as chromosome identifiers (sequence space), strand information and annotation data. Documentation

Motif Discovery

cosmo

The cosmo package allows to search a set of unaligned DNA sequences for a shared motif that may function as transcription factor binding site. The algorithm extends the popular motif discovery tool MEME (Bailey and Elkan, 1995) in that it allows the search to be supervised by specifying a set of constraints that the motif to be discovered must satisfy. Documentation

BCRANK

BCRANK is a method that takes a ranked list of genomic regions as input and outputs short DNA sequences that are overrepresented in some part of the list. The algorithm was developed for detecting transcription factor (TF) binding sites in a large number of enriched regions from high-throughput ChIP-chip or ChIP-seq experiments, but it can be applied to any ranked list of DNA sequences. Documentation

rGADEM: Documentation

MotIV: Documentation

ShortRead

The ShortRead package provides input, quality control, filtering, parsing, and manipulation functionality for short read sequences produced by high throughput sequencing technologies. While support is provided for many sequencing technologies, this package is primairly focused on Solexa/Illumina reads. Documentation

Rsamtools

Rsamtools provides functions for parsing and inspecting samtools BAM formatted binary alignment data. SAM/BAM is quickly becoming a universal standard alignment format, and is now supported by a wide variety of alignment tools. Documentation

Samtools Website
BWA (Burrows-Wheeler Alignment) Website

Additional tools for SNP analysis:

snpMatrix

BSgenome

BSgenome provides an object oriented infrastructure for interacting with a Biostring based genome sequence. BSgenome packages exist for many common genomes, and can be created to represent custom genomes. See the "How to forge a BSgenome data package" Vignette for instructions to create a new BSgenome package if a prebuilt package does not exist for your organism. Documentation

rtracklayer

rtracklayer provides an interface for exporting annotation feature data to various genome browsers and file formats (such as GFF). See the Small RNA Profiling exercise for an example of using rtracklayer to visualize alignment coverage. Documentation

biomaRt

The biomaRt package, provides an interface to a growing collection of databases implementing the BioMart software suite (http:// www.biomart.org). The package enables online retrieval of large amounts of data in a uniform way without the need to know the underlying database schemas. This data is retrieved automatically via the Internet, so it's recommended that you cache the data locally, or check versions if your code will be adversely affected by updates to these data. Documentation

ChIP-Seq Analysis Packages

Bioconductor provides various packages for analyzing and visualizing ChIP-Seq data. Only a small selection of these packages is introduced here. Additional useful introductions to this topic are: BioC ChIP-seq Case Study and BioC ChIP-Seq.

chipseq

The chipseq package combines a variety of HT-Seq packages to a pipeline for ChIP-Seq data analysis. Documentation

BayesPeak

BayesPeak is a peak calling package for identifying DNA binding sites of proteins in ChIP-Seq experiments. Its algorithm uses hidden Markov models (HMM) and Bayesian statistical methods. The following sample code introduces the identification of peaks with the BayesPeak package as well as the incorporation of read coverage information obtained by the chipseq package. Documentation [ Publication ]

PICS

The PICS package applies probabilistic inference to aligned-read ChIP-Seq data in order to identify regions bound by transcription factors. PICS identifies enriched regions by modeling local concentrations of directional reads, and uses DNA fragment length prior information to discriminate closely adjacent binding events via a Bayesian hierarchical t-mixture model. The following sample code uses the test data set from the above BayesPeak package in order to compare the results from both methods by identifying their consensus peak set. Documentation [ Publication ]

ChIPpeakAnno

The ChIPpeakAnno package provides. batch annotation of the peaks identified from either ChIP-seq or ChIP-chip experiments. It includes functions to retrieve the sequences around peaks, obtain enriched Gene Ontology (GO) terms, find the nearest gene, exon, miRNA or custom features such as most conserved elements and other transcription factor binding sites supplied by users. The package leverages the biomaRt, IRanges, Biostrings, BSgenome, GO.db, multtest and stat packages. Documentation

Additional ChIP-Seq Packages

DiffBind: Documentation

MOSAICS: Documentation

iSeq: Documentation

ChIPseqR: Documentation

ChiPsim: Documentation

CSAR: Documentation

ChIP-Seq Pipeline: PICS, rGADEM and MotIV (developer web site)

SPP: ChIP-seq processing pipeline

SPP Tutorial

MACS

SIPeS

RNA-Seq Analysis

Counting Reads that Overlap with Annotation Ranges

The GenomicRanges package provides support for importing into R short read alignment data in BAM format (via Rsamtools) and associating them with genomic feature ranges, such as exons or genes. This way one can quantify the number of reads aligning to annotated genomic regions. The package defines general purpose containers for storing genomic intervals as well as more specialized containers for storing alignments against a reference genome. The two main functions for read counting provided by this infrastructure are countOverlaps and summarizeOverlaps. For their proper usage, it is important to read the corresponding PDF manual. Documentation

Differential Gene Expression Analysis with DESeq

The DESeq package contains functions to call differentially expressed genes (DEGs) in count tables based on a model using the negative binomial distribution. It expects as input a data frame with the raw read counts per region/gene of interest (rows) for each test sample (columns). Such a count table can be imported into R or generated from BAM alignment files using the countOverlaps function as introduced above. Documentation

Differential Gene Expression Analysis with edgeR

The edgeR package uses empirical Bayes estimation and exact tests based on the negative binomial distribution to call differentially expressed genes (DEGs) in count data.

Documentation

A variety of additional R packages are available for normalizing RNA-Seq read count data and identifying differentially expressed genes (DEG):

easyRNASeq (simplifies read counting per genome feature)

DEXSeq (Inference of differential exon usage); parathyroidSE explains how to generate exon read counts in R

DEGseq

baySeq (also see: segmentSeq)

Genominator (Bullard et al. 2010)

Detection of Alternative Splice Junctions

Another utility of RNA-Seq experiments is the analysis of splice junctions. The following software suggestions provide this utility:

ERANGE
TopHat

SpliceMap

SplitSeek

DNA-Methylation Data Analysis

methylPipe
bsseq
BiSeq
Much more under BiocViews

HT-Seq Data Visualization

ggbio: ggplot2 extension for genomics data (online manual) Gviz: Plotting data and annotation information along genomic coordinates HilbertVis: Hilbert genome plots

GenomeGraphs: Plotting genomic information from Ensembl

TileQC: Flow Cell Quality Visualization

rtracklayer: R interface to genome browsers

genoPlotR: Plotting maps of genes and genomes

Genominator: Tools for storing, accessing, analyzing and visualizing genomic data.

To install all packages

source("http://bioconductor.org/biocLite.R")
biocLite()
biocLite(c("ShortRead", "Biostrings", "IRanges", "BSgenome", "rtracklayer", "biomaRt", "chipseq", "ChIPpeakAnno", "Rsamtools", "BayesPeak", "PICS", "GenomicRanges", "DESeq", "edgeR", "leeBamViews", "GenomicFeatures", "BSgenome.Celegans.UCSC.ce2"))

ARCS: scaffolding genome drafts with linked reads

Rahul Nayak — Tue, 06 Mar 2018 16:35:26 -0600

ARCS, an application that utilizes the barcoding information contained in linked reads to further organize draft genomes into highly contiguous assemblies. We show how the contiguity of an ABySS H.sapiensgenome assembly can be increased over six-fold, using moderate coverage (25-fold) Chromium data. We expect ARCS to have broad utility in harnessing the barcoding information contained in linked read data for connecting high-quality sequences in genome assembly drafts.

Address of the bookmark: https://github.com/bcgsc/ARCS/

Postdoc position at Centre Méditerranéen de Médecine Moléculaire - Nice - France

Wed, 04 Jun 2014 07:20:57 -0500

The research group of Dr. Michele Trabucchi at the Centre Méditerranéen de Médecine Moléculaire (C3M) at INSERM U1065 (University of Nice Sophia-Antipolis, France) is seeking candidates for a Postdoctoral fellow position to start on October 2014 for 3 years funded by FRM (Fondation pour la Recherche Médicale).
The broad interest of the lab is in understanding the expression control and function of small RNAs in activated myeloid cells (visit our webpage to check research interests and publications of the group : http://www.unice.fr/c3m/EN/Equipe10.html ).

The work will focus on the functional studies of small RNAs by using next-generation sequencing approaches.

Candidates should hold a Ph.D. degree and have strong background in bioinformatics.
The University of Nice Sophia-Antipolis provides a wide range of facilities and training essential for biomedical research.

Interested applicants should send a PDF with a cover letter stating research interests and qualifications, an updated CV, a summary of previous research experience and contact information for two references to Michele Trabucchi ( mtrabucchi@unice.fr )

Homepage: http://www.unice.fr/c3m/EN/Equipe10.html

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

Ten recommendations for creating usable bioinformatics command line software

RAJESH DETROJA — Sun, 08 Jun 2014 10:06:26 -0500

Bioinformatics software varies greatly in quality. In terms of usability, the command line interface is the first experience a user will have of a tool. Unfortunately, this is often also the last time a tool will be used. Here I present ten recommendations for command line software author’s tools to follow, which I believe would greatly improve the uptake and usability of their products, waste less user’s time, and improve the quality of scientific analyses.

Address of the bookmark: http://www.gigasciencejournal.com/content/2/1/15?utm_content=buffer25ee0&utm_medium=social&utm_source=twitter.com&utm_campaign=buffer