BOL: Related items

Salzberg lab

Mon, 15 May 2017 05:14:01 -0500

We are a computational biology lab that develops novel methods for analysis of DNA and RNA sequences. Our research includes software for aligning and assembling RNA-seq data, whole-genome assembly, and microbiome analysis. We work closely with biomedical scientists to apply these methods to current problems arising in a broad spectrum of biological and medical research areas. We’re also part of the Center for Computational Biology, a group of 20+ faculty members and their labs at Johns Hopkins working on computational, statistical, and mathematical methods that can turn massive genomic data sets into biologically and clinically useful information.

https://salzberg-lab.org/

Quick next generation sequencing (NGS) terms definition

Neel — Fri, 09 Jun 2017 04:52:26 -0500

fragment size: the Illumina WGS protocol generates paired-end reads from both ends of longer fragments. The lengths of these fragments are assumed to be sampled from a normal distribution. Therefore, in the absence of structural variants, mapping locations of the paired ends span within an interval [δmin,δmax]. Most (>90%) of paired-end reads are sampled from no-SV regions, therefore the fragment size distribution can be learned empirically for each WGS data set separately.

concordant reads: a read pair is called concordant if they can be mapped to the reference genome as “expected”: (a) mapped to opposing strands where the upstream read is mapped to the forward strand and the downstream read is mapped to the reverse strand2, (b) the distance between ends is between the minimum and maximum expected fragment size.

discordant reads: briefly, any non-concordant read pair is considered discordant. Note that, by definition, the discordant read pairs signal potential SVs. The sequence signature produced by these type of reads is known as read-pair signature.

split reads: a read that can only be mapped to the reference genome by breaking into two sub-reads is called a split-read. These types of reads also indicate a potential SV or a short insertion or deletion (indel).

read depth: number of reads that map within a region of the genome. Overall genome-wide read depth is also referred to as depth of coverage. It is expected that the number of reads that “cover” each base-pair to follow a Poisson distribution. Therefore, if the read depth over a certain region deviates significantly from this distribution, it signals for a potential copy number variation (CNV).

List of visualization tools for genome alignments

Rahul Nayak — Fri, 02 Feb 2018 13:25:33 -0600

Genome browsers are useful not only for showing final results but also for improving analysis protocols, testing data quality, and generating result drafts. Its integration in analysis pipelines allows the optimization of parameters, which leads to better results. But sometime, we need publication ready figure of genomes. Following are the list of genome alignment visualization tools, which could be useful for analysis and interpretation of results:

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV)

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

HALC: High throughput algorithm for long read error correction

Jit — Fri, 08 Jun 2018 10:47:41 -0500

HALC, a high throughput algorithm for long read error correction. HALC aligns the long reads to short read contigs from the same species with a relatively low identity requirement so that a long read region can be aligned to at least one contig region, including its true genome region’s repeats in the contigs sufficiently similar to it (similar repeat based alignment approach) HALC was able to obtain 6.7-41.1% higher throughput than the existing algorithms while maintaining comparable accuracy. The HALC corrected long reads can thus result in 11.4-60.7% longer assembled contigs than the existing algorithms.

Address of the bookmark: https://github.com/lanl001/halc

List of non-commercial NGS genotype-calling software

Jit — Thu, 09 Aug 2018 04:21:32 -0500

Meaningful analysis of next-generation sequencing (NGS) data, which are produced extensively by genetics and genomics studies, relies crucially on the accurate calling of SNPs and genotypes. Recently developed statistical methods both improve and quantify the considerable uncertainty associated with genotype calling, and will especially benefit the growing number of studies using low- to medium-coverage data.

A list of programs for genotype and SNP calling :

SOAP2 http://soap.genomics.org.cn/index.html

Single-sample High-quality variant database (for example, dbSNP) Package for NGS data analysis, which includes a single individual genotype caller (SOAPsnp)

realSFS http://128.32.118.212/thorfinn/realSFS/

Single-sample Aligned reads Software for SNP and genotype calling using single individuals and allele frequencies. Site frequency spectrum (SFS) estimation

Samtools http://samtools.sourceforge.net/

Multi-sample Aligned reads Package for manipulation of NGS alignments, which includes a computation of genotype likelihoods (samtools) and SNP and genotype calling (bcftools)

GATK http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit Multi-sample Aligned reads Package for aligned NGS data analysis, which includes a SNP and genotype caller (Unifed Genotyper), SNP filtering (Variant Filtration) and SNP quality recalibration (Variant Recalibrator)

Beagle http://faculty.washington.edu/browning/beagle/beagle.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation, phasing and association that includes a mode for genotype calling

IMPUTE2 http://mathgen.stats.ox.ac.uk/impute/impute_v2.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation and phasing, including a mode for genotype calling. Requires fine-scale linkage map

QCall ftp://ftp.sanger.ac.uk/pub/rd/QCALL

Multi-sample LD ‘Feasible’ genealogies at a dense set of loci, genotype likelihoods Software for SNP and genotype calling, including a method for generating candidate SNPs without LD information (NLDA) and a method for incorporating LD information (LDA). The ‘feasible’ genealogies can be generated using Margarita (http://www.sanger.ac.uk/resources/software/margarita)

MaCH http://genome.sph.umich.edu/wiki/Thunder

Multi-sample LD Genotype likelihoods Software for SNP and genotype calling, including a method (GPT_Freq) for generating candidate SNPs without LD information and a method (thunder_glf_freq) for incorporating LD information

CANU genome assembly parameters !

Rahul Nayak — Mon, 07 Jan 2019 08:40:37 -0600

Choose the appropriate parameters to run Canu and run it. The assembly will take about an hour. You can use two cores (parameter -maxThreads=2) and you would like to disable cluster option, since we compute on a single Amazon server set off the option to compute on cluster useGrid=false. This specifications should be for your project discussed with a local computing guru. The parameters that are in square brackets [] are optional, symbol | stands for "or".

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

*.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
*.trimmedReads.fastq : file containing the sequences after correction and final trimming
*.layout : file containing informations about read inclusion in the final assembly
*.gfa : file containing the assembly graph by Canu
*.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

Simka and SimkaMin are comparative metagenomics method dedicated to NGS datasets

Neel — Sat, 06 Jul 2019 13:56:10 -0500

Simka is a de novo comparative metagenomics tool. Simka represents each dataset as a k-mer spectrum and compute several classical ecological distances between them.

Developper: Gaëtan Benoit, PhD, former member of the Genscale team at Inria.

Contact: claire dot lemaitre at inria dot fr

Simka and SimkaMin are comparative metagenomics method dedicated to NGS datasets. https://gatb.inria.fr/software/simka/

Address of the bookmark: https://github.com/GATB/simka

Bioinformatics Services / CRO Services

RASA Life Sciences — Wed, 06 Nov 2019 00:33:11 -0600

RASA is set to provide premium technical and scientific services in a form of solutions, product development and training. .We are also very proficient in providing the high quality Research & Development services in life science informatics field like Next Generation Sequencing (NGS) Data Analysis,Computational Drug Discovery, Bioinformatics, Chemo-informatics and BIO-IT.

RASA offers faster, better and cost effective cutting edge technology solutions to chemical and life science research and industry. We provide our customers with A seamless model of wide expertise and comprehensive platforms. Our Value is to take our customers

gapFinisher: A reliable gap filling pipeline for SSPACE-LongRead scaffolder output

Rahul Nayak — Fri, 24 Jan 2020 06:04:40 -0600

gapFinisher is based on the controlled use of a previously published gap filling tool FGAP and works on all standard Linux/UNIX command lines. They compare the performance of gapFinisher against two other published gap filling tools PBJelly and GMcloser.

gapFinisher can fill gaps in draft genomes quickly and reliably.

Address of the bookmark: https://github.com/kammoji/gapFinisher

FiNGS: Filters for Next Generation Sequencing

Neel — Sat, 27 Feb 2021 01:18:35 -0600

Key features

Filters SNVs from any variant caller to remove false positives
Calculates metrics based on BAM files and provides filtering not possible with other tools
Fully user-configurable filtering (including which filters to use and their thresholds)
Option to use filters identical to ICGC recommendations

FiNGS provides researchers with a tool to reproducibly filter somatic variants that is simple to both deploy and use, with filters and thresholds that are fully configurable by the user. It ingests and emits standard variant call format (VCF) files and will slot into existing sequencing pipelines. It allows users to develop and implement their own filtering strategies and simple sharing of these with others.

FiNGS reliably improves upon the precision of default variant caller outputs and performs better than other tools designed for the same task.

Address of the bookmark: https://github.com/cpwardell/FiNGS