No of vacancies: 01

Pay scale:Rs. 15600 – 39100 + 6600/-

Essential Academic Qualifications / Experience : Good academic record as defined by the concerned university with at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master's Degree level in a relevant subject from an Indian University, or an equivalent degree from an accredited foreign university.

Besides fulfilling the above qualifications, the candidate must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/ SET.

Notwithstanding anything contained in sub-clauses (a) and (b) to this Clause, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/SLET/SET for recruitment and appointment of Assistant Professor or equivalent positions in Universities/Colleges/Institutions.

NET/SLET/SET shall also not be required for such Masters Programmes in disciplines for which NET/SLET/SET is not conducted.

Apply online: http://www.psc.cg.gov.in/htm/OA_ME2014.html

Last Date for Online Registration: 22/05/2014

For more details: http://www.psc.cg.gov.in/pdf/Advertisement/ADV_ME2014.pdf

What is Genome Assembly?

Genome assembly involves piecing together short DNA sequence reads generated by sequencing platforms (e.g., Illumina, PacBio, Oxford Nanopore) into longer, contiguous sequences called contigs. This can be performed as:

• De Novo Assembly: Without a reference genome.
• Reference-Guided Assembly: Using a reference genome to guide the assembly process.

Step 1: Preparing Your Data

Before starting the assembly, ensure that your raw sequencing data is high quality.

1. Input Data

   • Short Reads: Illumina sequencing generates short, accurate reads ideal for scaffolding.
   • Long Reads: PacBio and Nanopore sequencing provide long reads for resolving repetitive regions.

2. Quality Control (QC)
   Use tools like FastQC or MultiQC to assess the quality of your reads:

   fastqc reads.fastq multiqc .

   Look for issues like low-quality bases, adapter contamination, or overrepresented sequences.

3. Read Trimming and Filtering
   Trim low-quality bases and adapters using Trimmomatic or Cutadapt:

   trimmomatic PE reads_R1.fastq reads_R2.fastq trimmed_R1.fastq trimmed_R2.fastq \ ILLUMINACLIP:adapters.fa:2:30:10 LEADING:3 TRAILING:3 SLIDINGWINDOW:4:20 MINLEN:36

Step 2: Choosing an Assembly Strategy

Select an assembly strategy based on your data type:

• Short-Read Assemblers:

  • SPAdes: Popular for microbial genomes.
  • Velvet: Fast for smaller genomes.

• Long-Read Assemblers:

  • Canu: Ideal for long-read datasets.
  • Flye: Versatile for small and large genomes.

• Hybrid Assemblers:

  • MaSuRCA: Combines short and long reads.
  • Unicycler: Optimized for bacterial genomes.

Step 3: Running the Assembly

3.1. SPAdes (Short-Read Assembly)

SPAdes is an excellent choice for small genomes, such as bacteria.

The output includes assembled contigs (contigs.fasta) and scaffolds (scaffolds.fasta).

3.2. Canu (Long-Read Assembly)

Canu is designed for high-error long reads from PacBio or Nanopore.

The output will be in canu_output/genome.contigs.fasta.

3.3. Hybrid Assembly with Unicycler

Unicycler combines short and long reads for improved assemblies.

Step 4: Assessing Assembly Quality

After assembly, evaluate its quality using the following tools:

1. QUAST
   QUAST generates assembly statistics, such as N50, genome size, and GC content:

   quast contigs.fasta -o quast_output

2. BUSCO
   BUSCO checks genome completeness by identifying conserved genes:

   busco -i contigs.fasta -o busco_output -l fungi_odb10 -m genome

3. Assembly Graph Visualization
   Visualize assembly graphs with Bandage:

   Bandage load assembly_graph.gfa

Step 5: Post-Assembly Steps

1. Polishing
   Improve assembly accuracy using tools like Pilon (for short reads) or Racon (for long reads).

   racon long_reads.fasta mapped_reads.sam contigs.fasta > polished_contigs.fasta

2. Scaffolding
   Link contigs into scaffolds using tools like SSPACE or Opera-LG if required.

3. Annotation
   Annotate the assembled genome using Prokka for prokaryotes or Maker for eukaryotes.

   prokka --outdir annotation_output --prefix genome contigs.fasta

Step 6: Sharing and Archiving

1. Submit to Public Repositories
   Share your assembly in databases like NCBI GenBank, ENA, or DDBJ.

2. Metadata Preparation
   Include detailed metadata for your submission, such as organism name, sequencing platform, and coverage.

Best Practices

• Always perform quality checks at each stage to ensure data integrity.
• Use multiple tools to cross-validate results when working with complex genomes.
• Document parameters and software versions for reproducibility.

Conclusion

Genome assembly is a powerful process that transforms raw sequencing data into a coherent representation of an organism’s genome. By following this step-by-step guide, you can successfully assemble genomes and uncover valuable biological insights. Whether you’re assembling a microbial genome or tackling the complexities of a eukaryotic genome, these tools and strategies will set you on the path to success.

More at http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.compbio.dundee.ac.uk/jpred4/

Settings file

• Error

  Your web server does not have permission to create the settings.php file in your installation directory. You have two choices:

  1. Change the permissions on the elgg-config directory of your Elgg installation

  2. Copy the file elgg-config/settings.example.php to elgg-config/settings.php and follow the instructions in it for setting your database parameters.

To resolve this -- 

Change the permision 

chmod 777 elgg-config

Web server

• Warning

  Your server does not support automatic testing of the rewrite rules and your browser does not support checking via JavaScript. You can continue the installation, but you may experience problems with your site. You can manually test the rewrite rules by clicking this link: test. You will see the word success if the rules are working.

create a .httaccess

and provide detail in it

Installation of Elgg

(Note: Elgg requires installing an instance of MySQL.)

Steps to make adjustment and disposal of trial installations easier.

MySQL

At this point, we assume you've set up your MySQL database

Elgg

• dbCAN provides the capability of automated and comprehensive CAZyme annotation of a given genome submitted by the user;
• dbCAN provides an explicitly defined signature domain for each and every CAZyme family along with its location in all the relevant full-length CAZyme proteins in all sequenced genomes;
• dbCAN provides the most complete set of metagenomic CAZyme genes published so far and represents the first step towards discovering novel CAZyme catalysts in metagenomes;
• dbCAN provides a subfamily classification of the existing CAZyme families based on sequence similarities;
• dbCAN make all pre-computed data freely available to the public, including sequence alignments, hidden markov models (HMMs) and phylogenies of the signature domain regions in each and every CAZyme family and subfamily.

dbCAN is updated regularly when CAZy database created new families based on latest literature.

Address of the bookmark: http://csbl.bmb.uga.edu/dbCAN/index.php

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

Address of the bookmark: http://busca.biocomp.unibo.it/