BOL: Related items

Quick next generation sequencing (NGS) terms definition

Neel — Fri, 09 Jun 2017 04:52:26 -0500

fragment size: the Illumina WGS protocol generates paired-end reads from both ends of longer fragments. The lengths of these fragments are assumed to be sampled from a normal distribution. Therefore, in the absence of structural variants, mapping locations of the paired ends span within an interval [δmin,δmax]. Most (>90%) of paired-end reads are sampled from no-SV regions, therefore the fragment size distribution can be learned empirically for each WGS data set separately.

concordant reads: a read pair is called concordant if they can be mapped to the reference genome as “expected”: (a) mapped to opposing strands where the upstream read is mapped to the forward strand and the downstream read is mapped to the reverse strand2, (b) the distance between ends is between the minimum and maximum expected fragment size.

discordant reads: briefly, any non-concordant read pair is considered discordant. Note that, by definition, the discordant read pairs signal potential SVs. The sequence signature produced by these type of reads is known as read-pair signature.

split reads: a read that can only be mapped to the reference genome by breaking into two sub-reads is called a split-read. These types of reads also indicate a potential SV or a short insertion or deletion (indel).

read depth: number of reads that map within a region of the genome. Overall genome-wide read depth is also referred to as depth of coverage. It is expected that the number of reads that “cover” each base-pair to follow a Poisson distribution. Therefore, if the read depth over a certain region deviates significantly from this distribution, it signals for a potential copy number variation (CNV).

You can't install David Brownlee ;-)

Jit — Wed, 01 May 2019 21:47:36 -0500

By mistake I ask cpan to install abs, and it return this message.

jitendra@jitendra-Aspire-S3-391[parallelLastz] sudo cpan install abs [ 4:43AM]
Going to read '/home/jitendra/.cpan/Metadata'
Database was generated on Thu, 02 May 2019 00:08:06 GMT
Don't be silly, you can't install David Brownlee ;-)

WGS Celera Assembler version 8.3rc2

Jit — Mon, 10 Apr 2017 04:45:40 -0500

These are release notes for Celera Assembler version 8.3rc2, which was released on May 24, 2015.

This distribution package provides a stable, tested, documented version of the software. The distribution is usable on most Unix-like platforms, and some platforms have pre-compiled binary distributions ready for installation.

The source code package includes full source code (revision 4627), Makefiles, and scripts. A subset of the kmer package (http://kmer.sourceforge.net/, version r1994), used by some modules of Celera Assembler, is included. This distribution includes [http://samtools.sourceforge.net/ SAMtools], [http://www.cbcb.umd.edu/software/jellyfish/ Jellyfish 2.0], [https://github.com/pbjd/pbutgcns PBUTGCNS], [https://github.com/PacificBiosciences/pbdagcon PBDAGCON], [https://github.com/PacificBiosciences/BLASR BLASR], and parts of the [https://github.com/PacificBiosciences/FALCON/tree/v0.1.3 Falcon assembler].

Full documentation can be found online at http://wgs-assembler.sourceforge.net/.

Interesting scripts within it

urbe@urbo214b[bin] ls []
-rwxrwxr-x 1 urbe urbe 11K Apr 10 11:41 addCNSToStore
-rwxrwxr-x 1 urbe urbe 575K Apr 10 11:41 addReadsToUnitigs
-rwxrwxr-x 1 urbe urbe 128K Apr 10 11:41 analyzeBest
-rwxrwxr-x 1 urbe urbe 257K Apr 10 11:41 analyzePosMap
-rwxrwxr-x 1 urbe urbe 1,5M Apr 10 11:41 analyzeScaffolds
-rwxrwxr-x 1 urbe urbe 224K Apr 10 11:41 asmOutputFasta
-rwxrwxr-x 1 urbe urbe 448K Apr 10 11:41 asmOutputStatistics
-rwxrwxr-x 1 urbe urbe 2,4K Apr 10 11:41 asmToAGP.pl
-rwxrwxr-x 1 urbe urbe 7,6M Apr 10 11:41 blasr
-rwxrwxr-x 1 urbe urbe 1,6M Apr 10 11:41 bogart
-rwxrwxr-x 1 urbe urbe 183K Apr 10 11:41 bogus
-rwxrwxr-x 1 urbe urbe 272K Apr 10 11:41 bogusness
-rwxrwxr-x 1 urbe urbe 247K Apr 10 11:41 buildPosMap
-rwxrwxr-x 1 urbe urbe 213K Apr 10 11:41 buildRefContigs
-rwxrwxr-x 1 urbe urbe 990K Apr 10 11:41 buildUnitigs
-rwxrwxr-x 1 urbe urbe 18K Apr 10 11:41 ca2ace.pl
-rwxrwxr-x 1 urbe urbe 12K Apr 10 11:41 caqc_help.ini
-rwxrwxr-x 1 urbe urbe 61K Apr 10 11:41 caqc.pl
-rwxrwxr-x 1 urbe urbe 23K Apr 10 11:41 cat-corrects
-rwxrwxr-x 1 urbe urbe 24K Apr 10 11:41 cat-erates
-rwxrwxr-x 1 urbe urbe 1,9M Apr 10 11:41 cgw
-rwxrwxr-x 1 urbe urbe 1,4M Apr 10 11:41 cgwDump
-rwxrwxr-x 1 urbe urbe 204K Apr 10 11:41 chimChe
-rwxrwxr-x 1 urbe urbe 201K Apr 10 11:40 chimera
-rwxrwxr-x 1 urbe urbe 220K Apr 10 11:41 classifyMates
-rwxrwxr-x 1 urbe urbe 201K Apr 10 11:41 classifyMatesApply
-rwxrwxr-x 1 urbe urbe 215K Apr 10 11:41 classifyMatesPairwise
-rwxrwxr-x 1 urbe urbe 366K Apr 10 11:41 computeCoverageStat
-rwxrwxr-x 1 urbe urbe 9,8K Apr 10 11:41 convert-fasta-to-v2.pl
-rwxrwxr-x 1 urbe urbe 48K Apr 10 11:41 convertOverlap
-rwxrwxr-x 1 urbe urbe 119K Apr 10 11:41 convertSamToCA
-rwxrwxr-x 1 urbe urbe 20K Apr 10 11:41 convertToPBCNS
-rwxrwxr-x 1 urbe urbe 197K Apr 10 11:41 correct-frags
-rwxrwxr-x 1 urbe urbe 259K Apr 10 11:41 correct-olaps
-rwxrwxr-x 1 urbe urbe 520K Apr 10 11:41 correctPacBio
-rwxrwxr-x 1 urbe urbe 540K Apr 10 11:41 ctgcns
-rwxrwxr-x 1 urbe urbe 162K Apr 10 11:40 deduplicate
-rwxrwxr-x 1 urbe urbe 37K Apr 10 11:41 demotePosMap
-rwxrwxr-x 1 urbe urbe 1,5M Apr 10 11:41 dumpCloneMiddles
-rwxrwxr-x 1 urbe urbe 124K Apr 10 11:41 dumpPBRLayoutStore
-rwxrwxr-x 1 urbe urbe 1,3M Apr 10 11:41 dumpSingletons
-rwxrwxr-x 1 urbe urbe 171K Apr 10 11:41 erate-estimate
-rwxrwxr-x 1 urbe urbe 221K Apr 10 11:40 estimate-mer-threshold
-rwxrwxr-x 1 urbe urbe 1,5M Apr 10 11:41 extendClearRanges
-rwxrwxr-x 1 urbe urbe 1,3M Apr 10 11:41 extendClearRangesPartition
-rwxrwxr-x 1 urbe urbe 205K Apr 10 11:40 extractmessages
-rwxrwxr-x 1 urbe urbe 7,2M Apr 10 11:41 falcon_sense
-rwxrwxr-x 1 urbe urbe 9,8K Apr 10 11:41 fastaToCA
-rwxrwxr-x 1 urbe urbe 124K Apr 10 11:40 fastqAnalyze
-rwxrwxr-x 1 urbe urbe 137K Apr 10 11:40 fastqSample
-rwxrwxr-x 1 urbe urbe 62K Apr 10 11:40 fastqSimulate
-rwxrwxr-x 1 urbe urbe 121K Apr 10 11:40 fastqSimulate-sort
-rwxrwxr-x 1 urbe urbe 246K Apr 10 11:40 fastqToCA
-rwxrwxr-x 1 urbe urbe 140K Apr 10 11:41 filterOverlap
-rwxrwxr-x 1 urbe urbe 341K Apr 10 11:40 finalTrim
-rwxrwxr-x 1 urbe urbe 228K Apr 10 11:41 fixUnitigs
-rwxrwxr-x 1 urbe urbe 147K Apr 10 11:40 fragmentDepth
-rwxrwxr-x 1 urbe urbe 29K Apr 10 11:41 fragsInVars
-rwxrwxr-x 1 urbe urbe 545K Apr 10 11:41 frgs2clones
-rwxrwxr-x 1 urbe urbe 398K Apr 10 11:40 gatekeeper
-rwxrwxr-x 1 urbe urbe 139K Apr 10 11:40 gatekeeperbench
-rwxrwxr-x 1 urbe urbe 167K Apr 10 11:40 gkpStoreCreate
-rwxrwxr-x 1 urbe urbe 147K Apr 10 11:40 gkpStoreDumpFASTQ
-rwxrwxr-x 1 urbe urbe 184K Apr 10 11:41 greedyFragmentTiling
-rwxrwxr-x 1 urbe urbe 1,6K Apr 10 11:41 greedy_layout_to_IUM
-rwxrwxr-x 1 urbe urbe 142K Apr 10 11:40 initialTrim
-rwxrwxr-x 1 urbe urbe 967K Apr 10 11:41 jellyfish
-rwxrwxr-x 1 urbe urbe 219K Apr 10 11:41 markRepeatUnique
-rwxrwxr-x 1 urbe urbe 273K Apr 10 11:40 markUniqueUnique
-rwxrwxr-x 1 urbe urbe 114K Apr 10 11:40 mercy
-rwxrwxr-x 1 urbe urbe 3,8K Apr 10 11:41 mergeqc.pl
-rwxrwxr-x 1 urbe urbe 422K Apr 10 11:40 merTrim
-rwxrwxr-x 1 urbe urbe 125K Apr 10 11:40 merTrimApply
-rwxrwxr-x 1 urbe urbe 376K Apr 10 11:40 meryl
-rwxrwxr-x 1 urbe urbe 176K Apr 10 11:41 metagenomics_ovl_analyses
-rwxrwxr-x 1 urbe urbe 297K Apr 10 11:41 olap-from-seeds
-rwxrwxr-x 1 urbe urbe 275K Apr 10 11:41 outputLayout
-rwxrwxr-x 1 urbe urbe 229K Apr 10 11:41 overlapInCore
-rwxrwxr-x 1 urbe urbe 144K Apr 10 11:40 overlap_partition
-rwxrwxr-x 1 urbe urbe 179K Apr 10 11:41 overlapStats
-rwxrwxr-x 1 urbe urbe 179K Apr 10 11:41 overlapStore
-rwxrwxr-x 1 urbe urbe 153K Apr 10 11:41 overlapStoreBucketizer
-rwxrwxr-x 1 urbe urbe 175K Apr 10 11:41 overlapStoreBuild
-rwxrwxr-x 1 urbe urbe 33K Apr 10 11:41 overlapStoreIndexer
-rwxrwxr-x 1 urbe urbe 48K Apr 10 11:41 overlapStoreSorter
-rwxrwxr-x 1 urbe urbe 604K Apr 10 11:40 overmerry
lrwxrwxrwx 1 urbe urbe 4 Apr 10 11:41 pacBioToCA -> PBcR
-rwxrwxr-x 1 urbe urbe 131K Apr 10 11:41 PBcR
-rwxrwxr-x 1 urbe urbe 2,9M Apr 10 11:41 pbdagcon
-rwxrwxr-x 1 urbe urbe 1,9M Apr 10 11:41 pbutgcns
-rwxrwxr-x 1 urbe urbe 201K Apr 10 11:40 remove_fragment
-rwxrwxr-x 1 urbe urbe 153K Apr 10 11:40 removeMateOverlap
-rwxrwxr-x 1 urbe urbe 2,5K Apr 10 11:41 replaceUIDwithName-fastq
-rwxrwxr-x 1 urbe urbe 1,2K Apr 10 11:41 replaceUIDwithName-posmap
-rwxrwxr-x 1 urbe urbe 1,3M Apr 10 11:41 resolveSurrogates
-rwxrwxr-x 1 urbe urbe 139K Apr 10 11:41 rewriteCache
-rwxrwxr-x 1 urbe urbe 232K Apr 10 11:41 runCA
-rwxrwxr-x 1 urbe urbe 88K Apr 10 11:41 runCA-dedupe
-rwxrwxr-x 1 urbe urbe 14K Apr 10 11:41 runCA-overlapStoreBuild
-rwxrwxr-x 1 urbe urbe 3,6K Apr 10 11:41 run_greedy.csh
-rwxrwxr-x 1 urbe urbe 297K Apr 10 11:40 sffToCA
-rwxrwxr-x 1 urbe urbe 13K Apr 10 11:40 show-corrects
-rwxrwxr-x 1 urbe urbe 557K Apr 10 11:41 splitUnitigs
-rwxrwxr-x 1 urbe urbe 1,4M Apr 10 11:41 terminator
drwxrwxr-x 2 urbe urbe 4,0K Apr 10 11:41 TIGR
-rwxrwxr-x 1 urbe urbe 526K Apr 10 11:41 tigStore
-rwxrwxr-x 1 urbe urbe 35K Apr 10 11:41 tracearchiveToCA
-rwxrwxr-x 1 urbe urbe 35K Apr 10 11:41 tracedb-to-frg.pl
-rwxrwxr-x 1 urbe urbe 44K Apr 10 11:41 trimFastqByQVWindow
-rwxrwxr-x 1 urbe urbe 18K Apr 10 11:40 uidclient
-rwxrwxr-x 1 urbe urbe 589K Apr 10 11:41 unitigger
-rwxrwxr-x 1 urbe urbe 42K Apr 10 11:40 upgrade-v8-to-v9
-rwxrwxr-x 1 urbe urbe 42K Apr 10 11:40 upgrade-v9-to-v10
-rwxrwxr-x 1 urbe urbe 854 Apr 10 11:41 utg2fasta
-rwxrwxr-x 1 urbe urbe 731K Apr 10 11:41 utgcns
-rwxrwxr-x 1 urbe urbe 561K Apr 10 11:41 utgcnsfix

Address of the bookmark: http://wgs-assembler.sourceforge.net/wiki/index.php/Main_Page

BioContainers

Jit — Thu, 20 Feb 2020 05:29:46 -0600

BioContainers is a community-driven project that provides the infrastructure and basic guidelines to create, manage and distribute bioinformatics packages (e.g conda) and containers (e.g docker, singularity). BioContainers is based on the popular frameworks Conda, Docker and Singularity.

Address of the bookmark: https://biocontainers.pro/#/

Perl Maven tutorial by Gabor Szabo

Jitendra Narayan — Fri, 09 Aug 2013 05:43:10 -0500

I personally reccoment this tutorial for Perl users.

More detail http://perlmaven.com/

Cava Deployment Tools

Jitendra Narayan — Wed, 14 Aug 2013 15:00:48 -0500

Cava Packager allows packaging of applications written in Perl. Packaged applications can be distributed without the need for an installation of Perl on the target machine. Cava Packager is currently distributed under a free to use license.

Supported Perl Versions

Threaded Perl with a shared libperl 5.8, 5.10, 5.12, 5.14, 5.16

Supported Operating Systems

    MS Windows XP and later 32 and 64 bit.

    Linux 32 and 64 bit - minimum glibc 2.5, GTK+ 2.10, libstdc++6.

    Linux 32 bit RHEL 3 and 4.

    Mac OSX 10.4 and 10.5 - ppc and i386.

    Mac OSX 10.6, 10.7, 10.8 - i386 and x86_64 ( 64 bit for Perl 5.16 only ).

Address of the bookmark: http://www.cavapackager.com/

Bioinformatics Scripts

Jit — Thu, 22 Jan 2015 22:29:39 -0600

Some of the useful bioinformatics scripts.

For example ... contig-stats.pl is a Perl script that will automatically describe features of a sequence assembly.

http://milkweedgenome.org/?q=scripts

Address of the bookmark: http://milkweedgenome.org/?q=scripts

Reverse Complement Problem Solved with Perl

Jit — Tue, 09 Jun 2015 23:37:23 -0500

Question at http://rosalind.info/problems/1b/

#Find the reverse complement of a DNA string.
#Given: A DNA string Pattern.
#Return: Pattern, the reverse complement of Pattern.

use strict;
use warnings;

my $string="AAAACCCGGT";
my $finalString="";
my %hash = (
   "C" => "G",
   "A" => "T",
   "T" => "A",
   "G" => "C",
);

for (my $aa=0; $aa<=(length($string)-1); $aa++) {
   my $char=substr $string, $aa, 1;
   #print $hash{$char};
   $finalString="$hash{$char}"."$finalString";
}

print $finalString;
print "\n";

Clump Finding Problem Solved with Perl

Jit — Wed, 10 Jun 2015 00:17:17 -0500

The question at http://rosalind.info/problems/1d/

Script are moved to http://bioinformaticsonline.com/snippets/view/34633/clump-finding-problem-solved-with-perl

Many-Core Engine (MCE) for Perl example

Jit — Tue, 31 Jan 2017 05:37:50 -0600

MCE spawns a pool of workers and therefore does not fork a new process per each element of data. Instead, MCE follows a bank queuing model. Imagine the line being the data and bank-tellers the parallel workers. MCE enhances that model by adding the ability to chunk the next n elements from the input stream to the next available worker.

CORE MODULES

Three modules make up the core engine for MCE.

MCE::Core: Provides the Core API for Many-Core Engine. The various MCE options are described here.
MCE::Signal: Temporary directory creation, cleanup, and signal handling.
MCE::Util: Utility functions for Many-Core Engine.

MCE EXTRAS

There are 4 add-on modules for use with MCE.

MCE::Candy: Provides a collection of sugar methods and output iterators for preserving output order.
MCE::Mutex: Provides a simple semaphore implementation supporting threads and processes.
MCE::Queue: Provides a hybrid queuing implementation for MCE supporting normal queues and priority queues from a single module. MCE::Queue exchanges data via the core engine to enable queuing to work for both children (spawned from fork) and threads.
MCE::Relay: Enables workers to receive and pass on information orderly with zero involvement by the manager process while running.

MCE MODELS

The models take Many-Core Engine to a new level for ease of use. Two options (chunk_size and max_workers) are configured automatically as well as spawning and shutdown.

MCE::Loop: Provides a parallel loop utilizing MCE for building creative loops.
MCE::Flow: A parallel flow model for building creative applications. This makes use of user_tasks in MCE. The author has full control when utilizing this model. MCE::Flow is similar to MCE::Loop, but allows for multiple code blocks to run in parallel with a slight change to syntax.
MCE::Grep: Provides a parallel grep implementation similar to the native grep function.
MCE::Map: Provides a parallel map model similar to the native map function.
MCE::Step: Provides a parallel step implementation utilizing MCE::Queue between user tasks. MCE::Step is a spin off from MCE::Flow with a touch of MCE::Stream. This model, introduced in 1.506, allows one to pass data from one sub-task into the next transparently.
MCE::Stream: Provides an efficient parallel implementation for chaining multiple maps and greps together through user_tasks and MCE::Queue. Like with MCE::Flow, MCE::Stream can run multiple code blocks in parallel with a slight change to syntax from MCE::Map and MCE::Grep.

MISCELLANEOUS

Miscellaneous additions included with the distribution.

MCE::Examples: Describes various demonstrations for MCE including a Monte Carlo simulation.
MCE::Subs: Exports functions mapped directly to MCE methods; e.g. mce_wid. The module allows 3 options; :manager, :worker, and :getter.

REQUIREMENTS

Perl 5.8.0 or later. PDL::IO::Storable is required in scripts running PDL.

SOURCE AND FURTHER READING

The source, cookbook, and examples are hosted at GitHub.