In comparative genome analysis work, we usually compare more than two genomes and looks for syntenic regions amongst them. In my research I used Evolution Highway (RH) http://eh-demo.ncsa.uiuc.edu/, which is a collaborative project designed to provide a visual means for simultaneously comparing genomes of multiple amniote species. The tool removes the burden of manually aligning these maps and allows cognitive skills to be used toward something more valuable than preparation and transformation of data. In addition to EH, attractive Circos (http://circos.ca/) is also very popular for this kind of analysis.

The EH is available online, and can be easily access and use, whereas Circos installation is not entirely straightforward. One of the most difficult parts of the installation involves installing the GD library. Since there weren't good instructions for installing this library on the internet I decided to post instructions here in case they are useful to anyone else.

Following are the steps to install GD modules in Mac OS

1. Setup

Create a folder for the files:

$ mkdir -p /SourceCache
$ cd /SourceCache

Get and unpack the required Jpeg-6b and GD libraries:
Download Jpeg-6b (http://code.google.com/p/google-desktop-for-linux-mirror/downloads/detail?name=jpeg-6b.tar.gz&can=2&q)
Download GD (http://search.cpan.org/~lds/GD-2.46/)

Place the "tar.gz" files in "/SourceCache" and double click to unpack.

2. Install libjpeg

Copy the "config.sub" and "config.guess" files to "/SourceCache". Note that your "config.sub" and ""config.guess" files may be in a slightly different location. The commands below show where they were on my machine:

$ cd /SourceCache/jpeg-6b/src
$ cp /usr/share/libtool/config/config.sub .
$ cp /usr/share/libtool/config/config.guess .

Configure libjpeg as follows. Note that this was installed on a 64 bit machine. However, this method may configure it in a 32 bit format. This may not be the best way to configure the installation but it works.

$ .configure --enable-shared
$ make

Check to see if the following directories exist on your machine. Create the missing directories in the following manner:

$ mkdir -p /usr/local/include
$ mkdir -p /usr/local/bin
$ mkdir -p /usr/local/lib
$ mkdir -p /usr/local/man/man1

Finish making and installing libjpeg:

$ make install

3. Install GD

$ cd /SourceCache/GD-2.46/GD/
$ perl Makefile.PL
$ make
$ make test (optional)
$ make html (optional)
$ make install

Other way for Mac OS
The easiest way to get a lot of these is with a program called Fink, which is similar in nature to the CPAN installer, but installs common GNU utilities. Fink is available from <http://sourceforge.net/projects/fink/>.

Follow the instructions for setting up Fink. Once it's installed, you'll want to run the following as root: fink install gd

It will prompt you for a number of dependencies, type 'y' and hit enter to install all of the dependencies. Then watch it work.

To prevent creating conflicts with the software that Apple installs by default, Fink creates its own directory tree at /sw where it installs most of the software that it installs. This means your libraries and headers for libgd will be at /sw/lib and /sw/include instead of /usr/lib and /usr/local/include. Because of these changed locations for the libraries, the Perl GD module will not install directly via CPAN, because it looks for the specific paths instead of getting them from your environment. But there's a way around that :-)

Instead of typing "install GD" at the cpan> prompt, type look GD. This should go through the motions of downloading the latest version of the GD module, then it will open a shell and drop you into the build directory. Apply below patch to the Makefile.PL file (save the patch into a file and use the command patch < patchfile.)

Then, run these commands to finish the installation of the GD module:

perl Makefile.PL
make
make test
make install
And don't forget to run exit to get back to CPAN.

Install on MS Window, using PPM

C:\Documents and Settings\Owner>ppm
PPM interactive shell (2.2.0) - type 'help' for available commands.
PPM> install GD
Install package 'GD?' (y/N): y
Installing package 'GD'...
Downloading http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW. ...
Installing C:\Perl\site\lib\auto\GD\GD.bs
Installing C:\Perl\site\lib\auto\GD\GD.dll
Installing C:\Perl\site\lib\auto\GD\GD.exp
Installing C:\Perl\site\lib\auto\GD\GD.lib
Installing C:\Perl\html\site\lib\GD.html
Installing C:\Perl\site\lib\GD.pm
Installing C:\Perl\site\lib\qd.pl
Installing C:\Perl\site\lib\auto\GD\autosplit.ix
PPM>


If you can't install it from ppm. You can download it:
http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.


BTW,All Perl 5.6.1 Modules are located at:

http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.

Install the Perl GD Module on Linux

$ sudo perl -MCPAN -e shell

Since it was the first time I had run this command on this particular machine I had to answer a lot of questions but simply selected the defaults for everything as this usually works for me. Once in the CPAN shell I entered

$ install Bundle::CPAN

and selected all of the defaults again. Once the CPAN bundle had finished installing I tried to install GD::Graph by typing

$ install GD::Graph

but it failed with hundreds of errors – the first of which was

GD.xs:7:16: error: gd.h: No such file or directory

This was fixed with the following apt-get command (in the bash shell)

$ sudo apt-get install libgd2-xpm-dev

back in the CPAN shell I still couldn’t get GD::Graph to build and I guessed this was because of some left over files from the failed build. I don’t know the command to clean things up inside the CPAN shell and am too lazy to read the docs so I simply went into the .cpan/build directory in my home directory and deleted anything that started with GD – eg

$ rm -rf GD-2.35-HC_vkB

$ rm -rf GDGraph-1.44-Evfibe

and so on. Those strings at the end (VkB and so on) look random so they might be different on your machine. Then I went back into the CPAN shell and ran

$ install GD::Graph

There were a few dependencies which the script fetched and installed for me but everything worked smoothly.

Manual and other Perl Module instalation are mentioned in my previous blog @ http://bioinformaticsonline.com/blog/view/710/how-to-install-perl-modules-manually-using-cpan-command-and-other-quick-ways

http://www.eva.mpg.de/genetics/bioinformatics/overview.html?Fsize=0%2C%20%40%2F%27

Kelso Group
Department of Evolutionary Genetics
Max Planck Institute for Evolutionary Anthropology
Deutscher Platz 6
04103 Leipzig
Germany
Phone: +49 341 3550 500

Job:
http://www.eva.mpg.de/genetics/bioinformatics/jobs.html?Fsize=0%2C%2B%40

Use the Terminal or an Anaconda Prompt for the following steps.

1. To create an environment:

   conda create --name myenv
   

   NOTE: Replace myenv with the environment name.

2. When conda asks you to proceed, type y:

   proceed ([y]/n)?
   

This creates the myenv environment in /envs/. This environment uses the same version of Python that you are currently using, because you did not specify a version.

To create an environment with a specific version of Python:

conda create -n myenv python=3.4

To create an environment with a specific package:

conda create -n myenv scipy

OR:

conda create -n myenv python
conda install -n myenv scipy

To create an environment with a specific version of a package:

conda create -n myenv scipy=0.15.0

OR:

conda create -n myenv python
conda install -n myenv scipy=0.15.0

To create an environment with a specific version of Python and multiple packages:

conda create -n myenv python=3.4 scipy=0.15.0 astroid babel

TIP: Install all the programs that you want in this environment at the same time. Installing 1 program at a time can lead to dependency conflicts.

To automatically install pip or another program every time a new environment is created, add the default programs to the create_default_packages section of your .condarc configuration file. The default packages are installed every time you create a new environment. If you do not want the default packages installed in a particular environment, use the --no-default-packages flag:

conda create --no-default-packages -n myenv python

TIP: You can add much more to the conda create command. For details, run conda create --help.

➜ redundans git:(master) ✗ conda create --name py27 python=2.7
Solving environment: done

==> WARNING: A newer version of conda exists. <==
current version: 4.5.0
latest version: 4.5.2

Please update conda by running

$ conda update -n base conda

## Package Plan ##

environment location: /home/urbe/anaconda3/envs/py27

added / updated specs:
- python=2.7

The following packages will be downloaded:

package | build
---------------------------|-----------------
wheel-0.31.0 | py27_0 61 KB
python-2.7.15 | h1571d57_0 12.1 MB
certifi-2018.4.16 | py27_0 142 KB
sqlite-3.23.1 | he433501_0 1.5 MB
setuptools-39.1.0 | py27_0 582 KB
openssl-1.0.2o | h20670df_0 3.4 MB
pip-10.0.1 | py27_0 1.7 MB
ca-certificates-2018.03.07 | 0 124 KB
------------------------------------------------------------
Total: 19.6 MB

The following NEW packages will be INSTALLED:

ca-certificates: 2018.03.07-0
certifi: 2018.4.16-py27_0
libedit: 3.1-heed3624_0
libffi: 3.2.1-hd88cf55_4
libgcc-ng: 7.2.0-hdf63c60_3
libstdcxx-ng: 7.2.0-hdf63c60_3
ncurses: 6.0-h9df7e31_2
openssl: 1.0.2o-h20670df_0
pip: 10.0.1-py27_0
python: 2.7.15-h1571d57_0
readline: 7.0-ha6073c6_4
setuptools: 39.1.0-py27_0
sqlite: 3.23.1-he433501_0
tk: 8.6.7-hc745277_3
wheel: 0.31.0-py27_0
zlib: 1.2.11-ha838bed_2

Proceed ([y]/n)? y

Downloading and Extracting Packages
wheel 0.31.0: #################################################################################################################################################################################################### | 100%
python 2.7.15: ################################################################################################################################################################################################### | 100%
certifi 2018.4.16: ############################################################################################################################################################################################### | 100%
sqlite 3.23.1: ################################################################################################################################################################################################### | 100%
setuptools 39.1.0: ############################################################################################################################################################################################### | 100%
openssl 1.0.2o: ################################################################################################################################################################################################## | 100%
pip 10.0.1: ###################################################################################################################################################################################################### | 100%
ca-certificates 2018.03.07: ###################################################################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use:
# > source activate py27
#
# To deactivate an active environment, use:
# > source deactivate
#

➜ redundans git:(master) ✗ source activate py27

Example:

if you want to run fastqc for QC of fastq file:

from subprocess import Popen,PIPE,call

p=Popen(["fastqc","-f","fastq","-o", "/home/name/result/","/dev/stdin"],stdin=fopen("read.fastq","r") ,stdout=PIPE,stderr=PIPE)

print p.stderr

p.stdout.close()

More:

http://pymotw.com/2/subprocess/

Address of the bookmark: https://github.com/ventoy/Ventoy

Following are the popular tool to detect HGT in genomes:

T-REX / 3.22

HGT detection / download & compile

20525630

RANGER-DTL / 2.0

HGT detection / download binary

22689773

PhyloNet / 3.6.1

HGT detection / download binary

18662388

Jane / 4.01

HGT detection / download binary (!license!)

20181081

TREE-PUZZLE / 5.3.rc16

HGT detection / download & compile

11934758

CONSEL / 0.20

HGT detection / download

11751242

DarkHorse / 1.5 rev170

HGT detection / download & install

17274820

HGTector / 0.2.1

HGT detection / git clone

25159222

EGID / 1.0

HGT detection / download

22355228

GeneMarkS / 4.30

HGT detection / download binary (!license!)

9461475

AutoDock

Stochastic (GA)

Flexible ligand and partially flexible target

ArgusLab

Systematic

Flexible ligandX-Score based

DOCK

Systematic (IC)

Flexible ligandDOCK 3.5 (force field)

eHITS

Systematic (RBD of fragments followed by reconstruction)Flexible ligand and partially flexible targetHiTS_Score (empirical)

FlexX

Systematic (IC)Flexible ligandFlexX SF (empirical)Commercial

FLIPDock

Stochastic (GA)Flexible ligand and flexible targetAUTODOCK (empirical)

FRED

Systematic (RBD)Flexible ligandChemScore, PLP, ScreenScore, ChemGauss (empirical/consensus)

GOLD

Stochastic (GA)

Flexible ligand and partially flexible targetGoldScore, ChemScore (empirical), ASP (knowledge based)

ICM

Stochastic (MC)

Flexible ligand and partially flexible targetICM SF (empirical)

ParDOCK

Stochastic (MC)

RigidBAPPL (empirical)

PLANTS

Stochastic (ACO)Flexible ligand and partially flexible target

CHEMPLP, PLP (empirical)

Surflex

Systematic (IC/MA)Flexible ligandHammerhead based (empirical)

Point to note:

Several studies have shown that the performance of most docking tools is highly dependent on the particular characteristics of both the binding site and the ligand to be investigated, and the determination which method would be more suitable in a specific context is difficult. We encouraged you to check several docking methods to determine which one(s) work best for your system.

sudo /etc/init.d/apache2 stop

sudo /etc/init.d/mysql stop

sudo /etc/init.d/proftpd stop

sudo /opt/lampp/lampp start

PhpMyAdmin “Wrong permissions on configuration file, should not be world writable!”

Once the Xammp is installed, it might be possible to set up the configuration file in writable mode. Try the following steps:

Just chmod 0755 the file

sudo chmod 0755 config.inc.php

Scallop paper has been published at Nature Biotechnology. The datasets and scripts used in this paper to compare the performance of Scallop and other assemblers are available at scalloptest.

Please also checkout the podcast about Scallop (thanks Roman Cheplyaka for the interview). It is available at both the bioinformatics chat and iTunes.

https://github.com/Kingsford-Group/scallop

Address of the bookmark: https://github.com/Kingsford-Group/scallop