Now, two research groups have engineered new optogenetic proteins that can be used to efficiently silence neurons. One of the two new proteins comes from the lab of Karl Deisseroth, a psychiatrist and neuroscientist at Stanford University who helped develop optogenetics as a research tool. His group’s new “off” switch for neurons was created by changing 10 of the 333 amino acids in an existing optogenetic protein, which itself had been engineered by combining natural proteins from green algae. That advance “creates a powerful tool that allows neuroscientists to apply a brake in any specific circuit with millisecond precision,” said Thomas Insel, director of the National Institute of Mental Health, in a released statement. The other new silencing protein, developed by scientists at the Humboldt University of Berlin and collaborators, was created by changing amino acids in the same existing optogenetic protein. 

Some researchers are also looking to optogenetics as a potential treatment for patients with a variety of conditions (see “For Mice, and Maybe Men, Pain Is Gone in a Flash,” and “Flipping on the Lights to Halt Seizures”) but there are huge challenges to overcome. The method requires genetic modification of cells to make them light-sensitive. It also requires implanted light sources for all but the shallowest of nerve endings.

1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

Address of the bookmark: https://biokit.readthedocs.io/en/latest/index.html

The Job detail

Advancing the SNP-discovery and polymorphism assessment work across several germplasm panels representing global genetic diversity
Population genetic and genomic analyses, testing the hypothesis related to adaptation in multiple geographic regions
Develop SNP assays from large scale GBS and other re-sequencing data for several target traits utilizing available phenotyping data
Combined analyses of genotypic and phenotypic data for discovery of marker-trait associations, and conducting GWAS
Processing, analyzing, and archiving large-scale genomic data sets, assessing data quality, conducting analyses, interpreting findings, and communicating findings to others including preparation of reports, presentations, posters and journal articles
Providing support to MSc and PhD students on topic related to its major core of research
Any other work assigned by the supervisor

The Person:

PhD in bioinformatics, genetics, computational biology preferably with 1 to 2 years of experience;
familiar with standard bioinformatics tools and scripting languages and emerging and evolving software platforms relevant to bioinformatics and computational biology;
ability to create new analytical pipelines; experience with handling large data sets;
ability to program in at least two of the following: C++, PERL, Python, R, Java.
will use next-generation sequencing technologies to generate marker data for genetic mapping and transcriptome data for expression QTL mapping, and will be responsible for data generation as well as data analysis.

Period and Remuneration: The assignment is for a period of two years, and can be extended for another year depending on performance. ICRISAT pays a very attractive all inclusive lump sum assignment fee payable in Indian Rupees.

How to Apply: Please send your application by email to icrisatjobs@cgiar.org, stating the job title (Special project Scientist-Sorghum Genomics) clearly in the subject column, addressed to the Director, Human Resources and Operations, ICRISAT, Patancheru, Andhra Pradesh 502 324, India, latest by 10 June 2014. The application should include an up-to-date Curriculum Vitae, a short statement of competencies and experience for the position, and the names and addresses (including phone/e-mail) of three referees. Only short-listed candidates will be contacted.

More at: http://www.icrisat.org/careers/Special-Project-Scientist-Sorghum-Genomics.htm

Webpage : https://www.scilifelab.se/about-us/
Opportunity: https://www.scilifelab.se/about-us/career/

Walk- in- Test cum Interview (based on test) for the selection of Research Associate

under the scheme “Distributed Information Sub Centre –DISC” & Research Assistant under scheme “Phytophthora, Fusarium and Ralstonia diseases of Horticultural and Field Crops” will be held at this Institute as per details indicated below.

WALK -IN- TEST CUM INTERVIEW

Name of the post : Research Associate

Date of Interview : 21-05-2014 at 10.00 AM

No. of posts : One

Qualifications : a)Essential

Ph.D Degree in Bioinformatics OR : Masters degree in Bioinformatics with a minimum of
60% marks or equivalent OGPA with at least two years research experience as evidenced from fellowship/ associateship/training/published papers etc.

b)Desirable: Experience in NGS data analysis.

Emoluments : Rs. 23,000/- per month + HRA (Masters Degree Holders)

Rs. 24,000/- per month + HRA (Ph.D Degree Holders)

Upper age limit : 40 years for Men & 45 years for Women as on date of Interview (Upper Age limits are relaxable for SC, ST and OBC candidates as per Govt. of India norms (at present 5 years for SC/ST and 3 years for OBC)

Duration of Project : Till 31-03-2017.

Title of Assigment : Research Assistant (on contract basis)

No. of vacancy : One

Qualification : Essential : Post Graduation in Bioinformatics and Minimum one year experience in NGS data analysis

Desirable : Experience in Perl/Python/R

Remuneration : Rs. 20,000/- per month (consolidated)

Scope of work :

1. Analysis of different file formats and their conversions.

2. Assessing the quality of data and filtering of raw reads.
3. Assembling the raw reads-de novo as well as reference mapping.
4. Compression of aligned reads using Jam tools
5. RNA-seq. Analysis
6. Differential expression testing involving Normalization, Statistical testing, heat map generation & hierarchical clustering
7. Annotating the assembled genome and geneet testing and their validation
8. Metabolic pathway analysis
9. Comparative genomics
10. Setting up of genome browsers.

Period of Assigment : Initially for six months.

Date & Venue of Interview : 21-05-2014 at IISR, Kozhikode at 10.00 AM

More at http://www.spices.res.in/pdf/disc-advtmnt.pdf

Chettinad Academy of Research and Education (CARE) invites applications from eligible and translational research-oriented candidates to the posts of Professor/Associate Professor/ Assistant Professor Computational Biology, Bioinformatics, and Pharmaceutical Chemistry.

Emoluments: As per UGC norms (Adequate Compensation for Postdoctoral/Teaching experience)

Candidates fulfilling the eligibility criteria as per the UGC norms can send their full CV with copies of certificates and reference letters to the following address by post or by e-mail on or before 31st May 2014

The Registrar,
Chettinad Academy of Research and Education,
Chettinad Health City
Kelambakkam, Chennai 603 103
Tamil Nadu
T +91 (0)44 4741 1000
F +91 (0)44 4741 1011
Email: jobs @chettinadhealthcity.com

Advertisement: http://182.73.176.163/chc/ads2014.pdf

http://www.eva.mpg.de/genetics/bioinformatics/overview.html?Fsize=0%2C%20%40%2F%27

Kelso Group
Department of Evolutionary Genetics
Max Planck Institute for Evolutionary Anthropology
Deutscher Platz 6
04103 Leipzig
Germany
Phone: +49 341 3550 500

Job:
http://www.eva.mpg.de/genetics/bioinformatics/jobs.html?Fsize=0%2C%2B%40

Tasks:  239 total,   1 running,  238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s):  0.0%us,  0.0%sy,  0.0%ni,100.0%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used,  14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  1 root      39   19  0  0  0 S  0.0  0.0   246:57.22 kipmi0
  2 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...