python -V

at the terminal. For purposes of this example we'll assume you have 3.1 installed. You'll next need to execute the following commands:

sudo apt-get install python2.6 idle-python2.6
sudo update-alternatives --install /usr/bin/python python /usr/bin/python3.1 1
sudo update-alternatives --install /usr/bin/python python /usr/bin/python2.6 10
sudo update-alternatives --config python

This last command will allow you to choose which version of python to use by default. If you have done everything above correctly, python2.6 should already be set as the default. If it is not, choose it to be the default. From now on, running python should start version 2.6.

sudo update-alternatives --remove-all python
sudo ln -s python3.1 /usr/bin/python

https://www.forbes.com/sites/jasonevangelho/2018/07/23/5-reasons-you-should-switch-from-windows-to-linux-right-now/#70c74923777b

The following table shows SLURM commands on the SOE cluster.

For more information, run man on the commands above. See some examples below.

1. Info about the partitions and nodes
List all the partitions available to you and the nodes therein:

sinfo

Nodes in state idle can accept new jobs.

Show a partition configuratuin, for example, SOE_main

scontrol show partition=SOE_main

Show current info about a specific node:

scontrol show node=<nodename>

You can also specify a group of nodes in the command above. For example, if your MPI job is running across soenode05,06,35,36, you can execute the command below to get the info on the nodes you are interested in:

scontrol show node=soenode[05-06,35-36]

An informative parameter in the output to look at would be CPULoad. It allows you to see how your application utilizes the CPUs on the running nodes.

2. Submit scripts
The header in a submit script specifies job name, partition (queue), time limit, memory allocation, number of nodes, number of cores, and files to collect standard output and error at run time, for example

#!/bin/bash

#SBATCH --job-name=OMP_run     # job name, "OMP_run"
#SBATCH --partition=SOE_main   # partition (queue)
#SBATCH -t 0-2:00              # time limit: (D-HH:MM) 
#SBATCH --mem=32000            # memory per node in MB 
#SBATCH --nodes=1              # number of nodes
#SBATCH --ntasks-per-node=16   # number of cores
#SBATCH --output=slurm.out     # file to collect standard output
#SBATCH --error=slurm.err      # file to collect standard errors

If the time limit is not specified in the submit script, SLURM will assign the default run time, 3 days. This means the job will be terminated by SLURM in 72 hrs. The maximum allowed run time is two weeks, 14-0:00.
If the memory limit is not requested, SLURM will assign the default 16 GB. The maximum allowed memory per node is 128 GB. To see how much RAM per node your job is using, you can run commands sacct or sstat to query MaxRSS for the job on the node - see examples below.
Depending on a type of application you need to run, the submit script may contain commands to create a temporary space on a computational node - see the discussion about using the file systems on the cluster.
Then it sets the environment specific to the application and starts the application on one or multiple nodes - see sbatch sample scripts in directory /usr/local/Samples on soemaster1.hpc.rutgers.edu.
You can submit your job to the cluster with sbatch command:

sbatch myscript.sh

3. Query job information
List all currently submitted jobs in running and pending states for a user:

squeue -u <username>

Command squeue can be run with format options to expose specific information, for example, when pending job #706 is scheduled to start running:

squeue -j 706 --format="%S"

START_TIME
2015-04-30T09:54:32

More info can be shown by placing additional format options, for example:

squeue -j 706 --format="%i %P %j %u %T %l %C %S"

JOBID PARTITION   NAME    USER STATE   TIMELIMIT  CPUS START_TIME
706   SOE_main  Par_job_3 mike PENDING 3-00:00:00 64   2015-04-30T09:54:32

To see when all the jobs, pending in the queue, are scheduled to start:

squeue --start 

List all running and completed jobs for a user

sqlog -u <username>

or

sqlog -j <JobID>

The following appreviations are used for the job states:

       CA   CANCELLED      Job was cancelled.

       CD   COMPLETED      Job completed normally.

       CG   COMPLETING     Job is in the process of completing.

       F    FAILED         Job termined abnormally.

       NF   NODE_FAIL      Job terminated due to node failure.

       PD   PENDING        Job is pending allocation.

       R    RUNNING        Job currently has an allocation.

       S    SUSPENDED      Job is suspended.

       TO   TIMEOUT        Job terminated upon reaching its time limit.

You can specify the fields you would like to see in the output of sqlog:

sqlog --format=list

The command below, for example, provides Job ID, user name, exit state, start date-time, and end date-time for job #2831:

sqlog -j 2831 --format=jid,user,state,start,end

List status info for a currently running job:

sstat -j <jobid>

A formatted output can be used to gain only a specific info, for example, the maximum resident RAM usage on a node:

sstat --format="JobID,MaxRSS" -j <jobid>

To get statistics on completed jobs by jobID:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -j <jobid>

To view the same information for all jobs of a user:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -u <username>

To print a list of fields that can be specified with the --format option:

sacct --helpformat

For example, to get Job ID, Job name, Exit state, start date-time, and end date-time for job #2831:

sacct -j 2831 --format="JobID,JobName,State,Start,End"

Another useful command to gain information about a running job is scontrol:

scontrol show job=<jobid>

4. Cancel a job
To cancel one job:

scancel <jobid>

To cancel one job and delete the TMP directory created by the submit script on a node:

sdel <jobid>

To cancel all the jobs for a user:

scancel -u <username>

To cancel one or more jobs by name:

scancel --name <myJobName>

Interested candidates may email their resume along with a cover letter to careers@arraygen.com

Official website: http://www.arraygen.com/

About 8,000 years ago, the gene EGLN1 changed by a single DNA base pair. Today, a relatively short time later on the scale of human history, 88 percent of Tibetans have the genetic variation, and it was virtually absent from closely related lowland Asians. The findings indicate the genetic variation endows its carriers with an advantage.

In those without the adaptation, low oxygen caused their blood to become thick with oxygen-carrying red blood cells, an attempt to feed starved tissues, which could cause long-term complications such as heart failure. The researchers found that the newly identified genetic variation protected Tibetans by decreasing the over-response to low oxygen.

Reference: http://www.nature.com/nature/journal/v512/n7513/abs/nature13408.html

Finally, I find the underlying R code in a file created by GrapheR. For more details read also the package vignette, which is available in English, French and German!

More at http://pythonhosted.org/pybedtools/

A powerful toolset for genome arithmetic.http://code.google.com/p/bedtools/

Please visit our site at www.arraygen.com